How to Datalog with Hptuners ngauge
Step 1: Make sure the Ngauge is on atleast FW 335
(If it is not please refer to our update ngauge article for help and the newest FW, it is also attached in this article)
Step 2: Download and save the appropriate Config for your vehicle from the Configs in this article. You will want to save the Config file under the configs folder on your ngauge.
Step 3: When you are ready to datalog simply go to diagnostics>datalogging> select the config and then normal or race mode. By touching the screen it will start the logger. It will indicate that it is recording by the yellow light blinking rapidly.
To stop logging simply touch the screen again.
These logs with save in numerical order and the dates for the logs will not be correct.