cp-e 3" Stainless Steel High-Flow Catted QKsple Downpipe for all 2011, 2012, 2013, 2014, 2015, 2016 and 2017 3.5L EcoBoost F-150s.
The factory downpipe on the 2011-2017 3.5L EcoBoost F-150s is the most restrictive point of the exhaust system for emissions reasons. Replacing the downpipe with this cp-e 3" Stainless Steel High-Flow Catted QKsple Downpipe will open up the flow of exhaust and increase your F-150s horsepower!
cp-e QKspl Downpipe FDDP00010T Features and Benefits:
- 5% Power Gains Through the RPM Band
- Full 3” to 3-1/2” Mandrel Bent 304 Stainless Steel Piping
- CNC-Milled 3/8” Stainless Steel Laser Cut Turbo Flanges
- Extra O2 Bung Allows for Addition of a Wideband Sensor
- Laser Cut Stainless Steel Bracket and Gasket Adapter
- Satin Finish that Provides Strength and Uniform Look
- Made in the USA
Mandrel bent tubing provides the QKspl downpipe with less turbulent exhaust flow which in turn increases power by 5% throughout the RPM band! For long lasting durability, the downpipe is made from bright annealed 304 stainless steel with a stunning satin finish that also provides the steel and welds of the downpipe with additional strength.
CNC milled turbo flanges match up with the stock turbos for an easy installation while a laser cut stainless steel bracket welded to the downpipe allows the use of the stock downpipe support. A laser cut gasket adapter is also supplied by cp-e to connect the downpipe to the factory exhaust system. Without this adapter, the 3” downpipe would not fit properly to the stock exhaust system and would result in exhaust leaks. Three O2 sensor bungs are included for the two stock O2 sensors while the third is available for installation of a wideband sensor.
Please Note: This part will not fit F-150 Raptor models.
Order this cp-e FDDP00010T 3" Stainless Steel High-Flow Catted QKsple Downpipe for your 2011, 2012, 2013, 2014, 2015, 2016 or 2017 3.5L EcoBoost F-150
*Not for sale or street use in CA & CARB states. It has the potential to violate the Clean Air Act.